Chapter 1 Overview; Overview Of Panel Operations; Overview Of The Operator Panel; Figure 1.1 Initialization Window - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 1
Overview
This chapter provides an overview of the operator panel and the remote panel.
1.1

Overview of Panel Operations

The operator panel or the remote panel is used to check the status and perform settings for the LT270 S2.
Note that to use the remote panel, network settings must be performed on the operator panel beforehand.
1.1.1

Overview of the Operator Panel

The operator panel is positioned on the center of the front external door. It is possible to perform operations
such as referencing/setting the library and drive status and opening the magazine door of the CAS from the
operator panel. By selecting the buttons on the operator panel, operations such as window transition,
function selection, and setup value input can be performed.
The windows on the operator panel can be roughly divided into the initialization window and menu window.
■
Initialization window
Initialization is started when the library is turned on. In the initialization window, the processing contents of
the library are displayed. The serial number for each cabinet is displayed in an expansion configuration.

Figure 1.1 Initialization window

FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
14
Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0