4-3.6.4 Inquiry Sense Keys; Table 4-23. Default Vendor And Product Identification Fields - Fujitsu M2488 Product Manual

TAPE UNIT SCSI COMMANDS

Table 4-23. Default Vendor and Product Identification Fields

LUN VENDOR ID
MTU "FUJITSU"
MC "FUJITSU"
Unknown or not "FUJITSU"
connected
4-3.6.4 INQUIRY Sense Keys
One of the following sense keys may be returned if a CHECK CONDITION was indicated:
SENSE KEY CONDITION
4h HARDWARE ERROR
5h ILLEGAL REQUEST
4-24
CONTROLLER
PRODUCT ID
"M2488" (single-ended "M2488"
SCSI interface)
"M2488D" (differential
SCSI interface)
"M2488" (single-ended "M2488A11" (ACL Medium Changer)
SCSI interface)
"M2488A12" (FACL Medium Changer)
"M2488D" (differential "M2488A11" (ACL Medium Changer)
SCSI interface)
"M2488A12" (FACL Medium Changer)
"M2488" (single-ended " "(i.e. all ASCII spaces)
SCSI interface)
"M2488D" (differential
SCSI interface)
1. SCSI interface error occurred due to hardware failure (e.g.
transfer of INQUIRY data failed due to hardware failure).
2. Inquiry data could not be read from NVRAM due to a hardware
error.
1. Reserved bit was found set in the CDB of the INQUIRY com-
mand.
2. The EVPD bit in the INQUIRY CDB is zero, but the Page Code
field is not zero.
3. An unsupported VPD page was requested in the INQUIRY
CDB.
4. A VPD page was requested from a LUN device type that is
unknown or not connected.
5. Flag bit in the INQUIRY CDB was set and Link bit was not set.
CG00000-011503 REV. A
M2488 PRODUCT GUIDE
LUN PRODUCT ID
DESCRIPTION
April 1997