Fujitsu M2488 Product Manual page 423

M2488 PRODUCT GUIDE
Table F-10. Routine 8 - Formatter Counters Diagnostic Error Codes (Continued)
ROUTINE TEST
0x01 Formatter Counter 0 test
0x08
0x08 0x02 Formatter Counter 1 test
0x08 0x03 Formatter Counter 2 test
April 1997
ERROR
TITLE
CODE
0x0A
0x0B
0x0C
0x01
0x02
0x03
0x04
0x05
0x06
0x07
0x08
0x09
0x0A
0x0B
0x01
CG00000-011503 REV. A
DIAGNOSTIC TESTS AND ERROR CODES
DESCRIPTION
The low byte count for Formatter Counter 0
did not contain the expected value after the
counter finished running
Test Jump Carry Out bit for the low byte
count of Formatter Counter 0 was not set as
expected after the counter finished running
WBEND_CNEH0 Interrupt not set as
expected
The Formatter Counter 1 count enable register
could not be cleared
A data miscompare occurred walking a one
through the Formatter Counter 1 high byte
count register
A data miscompare occurred walking a one
through the Formatter Counter 1 low byte
count register
Test Jump Carry Out bit for the high byte
count of Formatter Counter 1 was set prema-
turely before counter was started
An unexpected value was read in the count
enable register for Formatter Counter 1 after
the high byte counter finished running
The high byte count for Formatter Counter 1
did not contain the expected value after the
counter finished running
Test Jump Carry Out bit for the high byte
count of Formatter Counter 1 was not set as
expected after the counter finished running
Test Jump Carry Out bit for the low byte
count of Formatter Counter 1 was set prema-
turely before counter was started
An unexpected value was read in the count
enable register for Formatter Counter 1 after
the low byte counter finished running
The low byte count for Formatter Counter 1
did not contain the expected value after the
counter finished running
Test Jump Carry Out bit for the low byte
count of Formatter Counter 1 was not set as
expected after the counter finished running
The Formatter Counter 2 count enable register
could not be cleared
F-23