Fujitsu M2488 Product Manual page 392

CHK XX ERROR CODES
Table E-1. CHK xx Error Code Descriptions (Continued)
CHK XX
CODE
CB MAGAZINE TOP DETECTED DURING MOVING UP OR UNLOADING
D0 ACL SENSOR CABLE CHECK
D1 MAGAZINE MISPOSITION CORRECTION ERROR
D2 FEEDER ARM SENSOR OP/CL BOTH ON
D3 MOUNT ARM HOME SENSOR FAILURE
FEED IN TOO FAST
D4
D5 FEED IN RETRIES EXHAUSTED
D6 CARTRIDGE IN MAGAZINE ALWAYS ON
D7 CARTRIDGE CATCH TIMEOUT
D8 MOUNT ARM DOES NOT RETURN BACK TO HOME
D9 MOUNT CARTRIDGE RETRIES EXHAUSTED
DA UNFEED RETRIES EXHAUSTED
DB UNFEED TOO FAST OR CTG IN MAG SENSOR ALWAYS ON
DC INTERLOCK SW DETECT ERROR
DD CARTRIDGE INSTALLED INCORRECTLY
DF UNFEED SENSOR IS ON OR UNFEED COMPLETE
E0 FILE PROTECTED DURING WRITE OR DSE
E5 READ HEAD BIAS ERROR
E9 WRITE HEAD CIRCUIT HARDWARE ERROR
EC NOVRAM DATA ERROR
ED DOWN LOAD COMMAND CAN NOT EXECUTE
EE EJECT CLEANING CELL SENSOR ON
EF SERVO PROGRAM DOWN LOAD ERROR
F1 FAN ONE STOP OR SLOW ROTATION ERROR
F2 FAN TWO STOP OR SLOW ROTATION ERROR
F7 UNDEFINED SERVO OFFLINE ERROR
F8 NO CLEANING CARTRIDGE OR CANNOT EJECT CLEANING CARTRIDGE
F9 CLEANING CARTRIDGE IS NOT INSERTED IN CLEANING CELL
FA CLEANING CARTRIDGE IS NOT KEPT IN CLEANING CELL
FB DOOR OPEN ERROR DURING POWER UP
FC DOOR OPEN ERROR
E-6
DESCRIPTION
CG00000-011503 REV. A
M2488 PRODUCT GUIDE
April 1997