Table 6-29. Import Export Element Descriptor (Type Code=3H); Table 6-30. Import Export Element Descriptor Field Description - Fujitsu M2488 Product Manual

MEDIA CHANGER COMMANDS

Table 6-29. Import Export Element Descriptor (Type Code=3h)

BYTES 7
MSB
0-
1
2 Reserved
3
4
5
6-
8
9
SValid
MSB
10-
11
12-
15

Table 6-30. Import Export Element Descriptor Field Description

BYTE BIT VALUE
0-1
2 0
2 1
2 2
2 3
6-26
6 5 4
Element Address
Import Export
Enable =1 Enable=1
Additional Sense Code
Additional Sense Code Qualifier
Invert=0
Source storage element address
The Element address field indicates the address of the element for which status is
being reported in the descriptor.
1 The Full bit, if one, indicates that a magazine or cartridge is present in the import
export element.
0 If the Full bit is zero then no magazine or cartridge is present in the element.
1 The ImpExp bit, if one, indicates that the magazine was put into the import export
element by the operator.
0 If this bit zero then the magazine was placed into the import export element by the
medium-changer's medium transfer element; immediately following a magazine
unload the ImpExp bit will be zero. This bit is not defined when the import export
element's Full bit is zero.
1 The Exception bit, if one, indicates that the element is in an error condition.
0 If the Exception bit is zero then the element is not in an error condition. When the
Exception bit is one, the Additional Sense code and Additional sense code qualifier
fields give detailed information about the error condition.
1 If the Access bit is one then the import export element is accessible to the medium
transfer element.
0 If the Access bit is zero the import export element is not accessible to the medium
transfer element.
CG00000-011503 REV. A
M2488 PRODUCT GUIDE
BITS
3 2
Access Exception
Reserved
Reserved
Reserved
Reserved
DESCRIPTION
1 0
LSB
ImpExp Full
LSB
March 1997