6-3.3 Page Code 1Eh, Transport Geometry Parameters; Table 6-45. Facl Page Code 1Dh, Element Address Assignments Field Description; Table 6-46. Page Code 1Eh, Transport Geometry Parameters; Table 6-47. Page Code 1Eh, Transport Geometry Parameters Field Description - Fujitsu M2488 Product Manual

M2488 PRODUCT GUIDE
All fields in this page are reported as NOT changeable. The default
values are the same as the current values shown above and
described below.

Table 6-45. FACL Page Code 1Dh, Element Address Assignments Field Description

BYTE BIT VALUE
2-5 000Eh
6-9 0011h
10-13 0001h
14-17 000Dh
6-3.3 Page Code 1Eh, Transport Geometry Parameters

Table 6-46. Page code 1Eh, Transport Geometry Parameters

BYTES 7
0 PS * Reserved
1
2
3
* The PS bit must be set to 0 on a MODE SELECT command.
All fields in this page are reported as NOT changeable and default to
a value of zero.

Table 6-47. Page code 1Eh, Transport Geometry Parameters Field Description

BYTE BIT VALUE
2 0
3
March 1997
** NOTE **
There is one Medium Transport Element and it is referred to as address 000Eh.
The First Storage Element address is 0011h. The First Storage Element Address is
0011h. Storage Elements are the "slots" that may hold tape cartridges in a Maga-
zine. There are 31 logical storage elements. An FACL has seven Storage Elements.
There is one Import/Export Element address at 0001h. This is the Magazine Port.
There is one Data Transfer Element address at 000Dh. This is the Cartridge load
port in the MTU.
BITS
6 5 4
Additional Page Length
Reserved
Member Number in Transport Element Set
** NOTE **
0 This Element is not able to rotate the medium so the Rotate bit is 0.
00h There can be only one Medium Transport Element (Magazine) in the system at any
given time and it is defined here.
CG00000-011503 REV. A
MEDIA CHANGER COMMANDS
DESCRIPTION
3 2 1
Page Code
Rotate
DESCRIPTION
MODE SENSE
DEFAULT
0
VALUES
9Eh
02h
00h
00h
6-37