Fujitsu M2488 Product Manual page 275

M2488 PRODUCT GUIDE
SENSE KEY CONDITION
6h UNIT ATTENTION
Bh ABORTED COMMAND
Dh VOLUME OVERFLOW
March 1997
Indicates the MODE SENSE command was not performed due to
one of the following:
1. The tape cartridge may have been changed.
2. The target has been reset.
3. The Mode parameters have been changed by another initiator.
4. The version of the microcode has been changed (microcode
downloaded).
5. A cartridge was loaded with a tape length that is too long or too
short.
MODE SENSE command was aborted.
Write of buffered data prior to the MODE SENSE operation failed
because physical End-of-Tape has been reached.
CG00000-011503 REV. A
MEDIA CHANGER COMMANDS
DESCRIPTION
6-15