5.3 Precautions to Ensure Safe Tuning
5.3.5 Setting the Position Deviation Overflow Alarm Level at Servo ON
Refer to the following manual for information on troubleshooting alarms.
Σ
-7-Series
S800001 28)
Related Warnings
Warning Number
A.901
5-10
Σ
-7S SERVOPACK with MECHATROLINK-III Communications References Product Manual (Manual No.: SIEP
Warning Name
Position Deviation
Overflow Warning
at Servo ON
This warning occurs if the servo is turned ON while the position
deviation exceeds the specified percentage (Pn526 × Pn528/100).
Meaning