YASKAWA SGD7S series Product Manual page 247

Parameter
Name
No.
Option Field Allocations
2
1
ACCFIL Allocation (Option)

n. X
Pn82A
*13
M2
ACCFIL Allocation Enable/Disable Selection
 
n. X
G_SEL Allocation (Option)
 
n. X
0 to E The settings are the same as for the ACCFIL allocations.
G_SEL Allocation Enable/Disable Selection

n. X
Setting Setting
Range Unit
0000 to
–
1E1E
0 Allocate bits 0 and 1 to ACCFIL.
1 Allocate bits 1 and 2 to ACCFIL.
2 Allocate bits 2 and 3 to ACCFIL.
3 Allocate bits 3 and 4 to ACCFIL.
4 Allocate bits 4 and 5 to ACCFIL.
5 Allocate bits 5 and 6 to ACCFIL.
6 Allocate bits 6 and 7 to ACCFIL.
7 Allocate bits 7 and 8 to ACCFIL.
8 Allocate bits 8 and 9 to ACCFIL.
9 Allocate bits 9 and 10 to ACCFIL.
A Allocate bits 10 and 11 to ACCFIL.
B Allocate bits 11 and 12 to ACCFIL.
C Allocate bits 12 and 13 to ACCFIL.
D Allocate bits 13 and 14 to ACCFIL.
E Allocate bits 14 and 15 to ACCFIL.
0 Disable ACCFIL allocation.
1 Enable ACCFIL allocation.
0 Disable G_SEL allocation.
1 Enable G_SEL allocation.
10.1 List of Servo Parameters
10.1.2 List of Servo Parameters
Continued from previous page.
Default Applicable When
Setting Motors Enabled
After
1813 All
restart
Continued on next page.
Classi- Refer-
fication ence
*12
Setup
10
10-37