5.15
Finishing a Measurement Session
5.15.1 Disconnecting the Instrument
5.15.2 Instrument Shut Down
2016-04
When disconnecting, communication between the instrument and the computer is
terminated.
Remove the microplate and/or cuvette before disconnecting
the instrument from the computer.
Upon shut down, the instrument activity is stopped immediately. Normally, you
should disconnect before shut down. In the rare case of an unexpected hardware
error, immediate instrument shut down will reduce the risk of possible damage.
IFU for Infinite 200 PRO No. 30052730
5. Operating the Instrument
Note
Rev. No. 1.6
133
Need help?
Do you have a question about the Infinite 200 PRO and is the answer not in the manual?