Safety; Instrument Safety - tecan Infinite 200 PRO Instructions For Use Manual

1.

Safety

1.1

Instrument Safety

STOP
HEIGHTS AND WELL DEPTHS ARE CORRECT ACCORDING TO THE DEFINED
PLATE TYPE. THIS PARAMETER IS USED TO DETERMINE THE MINIMUM
DISTANCE BETWEEN THE TOP OF THE PLATE AND THE CEILING OF THE
MEASUREMENT CHAMBER. ADDITIONALLY, TECAN AUSTRIA HAS ADDED A
VERY SMALL SAFETY GAP TO PREVENT ANY DAMAGE OCCURRING TO THE
MEASUREMENT CHAMBER AS A RESULT OF SMALL CHANGES IN PLATE
USERS SHOULD ALSO TAKE CARE THAT NO POTENTIAL FLUORESCENT
AWARE THAT SOME PLATE SEALERS LEAVE BEHIND A STICKY RESIDUE
BEFORE STARTING MEASUREMENTS, MAKE SURE THAT THE MICROPLATE
STOP
POSITION A1 IS INSERTED CORRECTLY. THE POSITION OF WELL A1 HAS
STOP
2016-04
1. Always follow basic safety precautions when using this product to reduce
the risk of injury, fire, or electrical shock.
2. Read and understand all information in the Instructions for Use. Failure to
read, understand, and follow the instructions in this document may result
in damage to the product, injury to operating personnel or poor
instrument performance.
3. Observe all WARNING and CAUTION statements in this document.
4. Never open the housing of the Infinite 200 PRO while the instrument is
plugged into a power source.
5. Never force a microplate into the instrument.
6. The Infinite 200 PRO is intended as a general purpose laboratory
instrument for professional use. Observe proper laboratory safety
precautions, such as wearing protective clothing and using approved
laboratory safety procedures.
TECAN AUSTRIA GMBH HAS TAKEN GREAT CARE IN CREATING THE
STORED PLATE DEFINITION FILES THAT ARE RECEIVED WITH THE
WE HAVE TAKEN EVERY PRECAUTION TO ENSURE THAT THE PLATE
HEIGHT. THIS DOES NOT AFFECT THE PERFORMANCE OF THE
USERS MUST ENSURE THAT THE PLATE DEFINITION FILE SELECTED
CORRESPONDS TO THE ACTUAL PLATE BEING USED.
OR LUMINESCENT CONTAMINATION LIES ON TOP OF THE PLATE. BE
THAT MUST BE COMPLETELY REMOVED BEFORE STARTING
TO BE ON THE UPPER LEFT SIDE.
TO INSURE THE OPTIMAL WORKING OF TECAN INSTRUMENTS
WE RECOMMEND A SERVICE INTERVAL OF 6 MONTHS.
IFU for Infinite 200 PRO No. 30052730
CAUTION
INSTRUMENT SOFTWARE.
INSTRUMENT.
MEASUREMENTS.
CAUTION
CAUTION
Rev. No. 1.6
1. Safety
9