6.13.2 Recommended Types Of Microplates - tecan Infinite 200 PRO Instructions For Use Manual

6.13.2 Recommended Types of Microplates

STOP
Manufacturer / Pdfx-Name
Greiner
GRE6ft
GRE12ft
GRE24ft
GRE48ft
GRE96ft
GRE96fb_chimney
GRE96fw_chimney
GRE96ut
GRE96vt
GRE384fb
GRE384ft
2016-04
TO AVOID INSTRUMENT DAMAGE AND SAMPLE SPILL, MAKE SURE
THAT THE TYPE OF MICROPLATE THAT IS TO BE USED FOR THE
MEASUREMENT CORRESPONDS TO THE SELECTED PLATE
Generally, for high fluorescence sensitivity, black microplates are recommended.
For low concentrations of TRF labels, white microplates seem superior. You may
check if white plates are superior with UV excitation wavelengths.
We do not recommend using volumes less than a third of the maximum volume.
When using lower volumes, check the availability of a suitable plate type.
In order to ensure good performance for Fluorescence Bottom Reading, we
recommend using black plates with transparent bottom.
All standard microplates from 6 to 384 wells (maximum plate height 23 mm
including lid) that conform to the following standards can be measured:
ANSI/SBS 1-2004, ANSI/SBS 2-2004; ANSI/SBS 3-2004 and ANSI/SBS 4-2004.
When installing the operating software (i-control or Magellan), pre-defined plate
definition files are installed. Please refer to the following list for the corresponding
ordering numbers of the microplates. Please order microplates at your local
microplate supplier.
IFU for Infinite 200 PRO No. 30052730
CAUTION
DEFINITION (PDFX) FILE.
Cat.-No.
657 160 657 185
665 180 665 102
662 160 662 102
677 180 677 102
655 101 655 161
655 079 655 077
655 086 655 076
655 073 655 074
655 083 655 075
650 101 650 180
650 161 650 185
650 160
651 101 651 160
651 161 651 180
781 079 781 076
781 086 781 094
781 077 781 095
781 061 781 186
781 101 781 165
781 162 781 182
781 185
Rev. No. 1.6
6. Instrument Features
Drawing-No.:
AC-9909
AC-9910
AC-9911
AC-9912
AC-9701
AC-65507x
AC-65507x
AC-6501xx
AC-6511xx
AC-0205
AC-0205
149