Measurement With A Manual G-Factor - tecan Infinite 200 PRO Instructions For Use Manual

5. Operating the Instrument
5.6.7

Measurement with a Manual G-Factor

100
The calibrated G-Factor is marked as 'Calibrated G-Factor' with date and
signature.
If the displayed G-Factor does not match the calibrated value (e.g. the G-Factor
has been manually changed or loaded with a method), the corresponding value
will be marked as 'Manual G-Factor'.
The calibrated G-Factor can be restored by clicking the '>>' button on the left side
of the displayed G-Factor.
G-Factor adjustment via '>>' button is only possible, if a calibrated
G-Factor is available for the corresponding wavelength.
IFU for Infinite 200 PRO
Note
No. 30052730 Rev. No. 1.6 2016-04