Cuvette Features (Infinite M200 Pro Only); 6.11.1 Cuvette Specifications - tecan Infinite 200 PRO Instructions For Use Manual

6. Instrument Features
6.11

Cuvette Features (Infinite M200 PRO only)

6.11.1 Cuvette Specifications

STOP
146
The option 'Cuvette' is only available for the Infinite M200 PRO. This
module cannot be installed in an Infinite F200 PRO.
The cuvette option allows for performing absorbance measurement in fixed
wavelength and scan mode.
Parameters
Wavelength Range
Measurement Range
The following specifications are valid for the wavelength range from 300-700 nm,
number of flashes 25:
Cuvette types
Accuracy 0 – 2 OD
Accuracy 2 – 3 OD
Reproducibility 0 – 2 OD
Reproducibility 2 – 3 OD
Linearity 0 – 2 OD
Baseline Flatness
THE CUVETTE PORT OF INFINITE M200 PRO CANNOT BE USED FOR
CUVETTES WITH A MEASUREMENT WINDOW < 2 MM (DIAMETER)
AND A CENTER HEIGHT BELOW 15 MM.
IFU for Infinite 200 PRO
Note
Characteristics
230 – 1000 nm
(no filter necessary,
selection in 1 nm steps possible)
0 – 4 OD
12.5 x 12.5 mm:
maximum height 55 mm (including lid);
micro cuvettes:
center height 15 mm,
measurement window > 2 mm (diameter).
< ± (1 % + 18 mOD)
< ± 2.5 %
< ± (1 % + 10 mOD)
< ± 2.5 %
2
R > 0.998
± 10 mOD (1 sigma)
CAUTION
No. 30052730 Rev. No. 1.6 2016-04