tecan Infinite 200 PRO Instructions For Use Manual page 84

5. Operating the Instrument
STOP
84
No special characters (blank, ?, $, %, ., /, etc.) except '_' are allowed for
THE FILTER SLIDE DESCRIPTION IS PART OF THE G-FACTOR KEY
VALUE. IF MANUALLY ENTERED, AVOID USING THE SAME
DESCRIPTION FOR THE DIFFERENT FILTER SLIDES.
Position 1 - 4: Filter definition editor for the filters (filter pairs) on positions 1, 2, 3
and 4.
Select the appropriate filter position and enter the new wavelength, bandwidth
and measurement mode for each new filter:
Measurement Mode: chose from the dropdown list 'FI' for fluorescence intensity,
'ABS' for absorbance, 'FP' for fluorescence polarization and 'Empty' for filter-free
positions
IFU for Infinite 200 PRO
Note
the filter slide description.
CAUTION
No. 30052730 Rev. No. 1.6 2016-04