Result Display In Ms Excel; Miscellaneous Software Features Of Mrw - tecan Infinite 200 PRO Instructions For Use Manual

5. Operating the Instrument
5.8.4

Result Display in MS Excel

5.8.5

Miscellaneous Software Features of MRW

106
The MS Excel result sheet generated by the i-control software displays a
schematic graphical overview ('Multiple Reads per Well – Alignment'; see Figure
42) of the measurement points. A number is assigned to each measurement
point. The results are presented in list form: number of measurement point versus
result value (OD or RFU; see Figure 41: Alignment graphic (XY-Line, 3 x 3) for
result of a fluorescence measurement). In addition, the standard deviation
('Stdev') and the average value ('Mean') of the measurements points/well are
also displayed:
Figure 41: Alignment graphic (XY-Line, 3 x 3)
Figure 42: Example of MS Excel result list generated by i-control.
MRW is only available for the measurement modes 'Absorbance', 'Fluorescence
Intensity Top' and 'Fluorescence Intensity Bottom'.
The MRW feature is not active when performing well-wise measurements.
'Reference Wavelength' (located on the absorbance strip) is not available in
combination with 'Multiple Reads per Well'.
IFU for Infinite 200 PRO No. 30052730 Rev. No. 1.6 2016-04