tecan Infinite 200 PRO Instructions For Use Manual page 64

4. Gas Control Module (Enhanced)
64
2. Connect the pressure regulator's outlet of the CO
gas handling system to the gas control module's inlet port ('CO2') on the
back. Use the provided long tube with quick connector and attach the tube to
the regulator of the cylinder with a plastic clamp, as depicted in Figure 26,
below.
Figure 26
3. If the GCM is configured for 'CO2 and O2', nitrogen gas can be used to
regulate the amount of oxygen, in addition to CO
Connect the pressure regulator's outlet of the N
central gas supply to the gas control module's inlet port ('N2') on the back.
Use the provided long tube with quick connector and attach the tube to the
regulator of the cylinder with a plastic clamp, as depicted in Figure 27,
below.
Figure 27
IFU for Infinite 200 PRO No. 30052730 Rev. No. 1.6
gas cylinder or laboratory
2
regulation.
2
gas cylinder or
2
2016-04