Multiple Reads Per Well; Mrw Type - tecan Infinite 200 PRO Instructions For Use Manual

5.8

Multiple Reads per Well

5.8.1

MRW Type

2016-04
The i-control software allows Multiple Reads per Well (MRW) to be performed in
absorbance, fluorescence top and fluorescence bottom mode.
The Multiple Reads per Well functions can be activated on an absorbance or
fluorescence intensity program strip by selecting the 'Multiple Reads per Well'
check box (see Figure 40below).
Figure 40: Multiple Reads per Well
The function 'Multiple Reads per Well' is only available for the fixed
wavelength reading modes 'absorbance', 'fluorescence intensity top'
and 'fluorescence intensity bottom'. The function is not available for
The MRW types define the pattern how the measurement will be performed. The
software allows seven different MRW types to be selected:
•
Square
•
Square (filled)
•
Circle
•
Circle (filled)
•
X-line
•
Y-line
•
XY-line
IFU for Infinite 200 PRO No. 30052730
5. Operating the Instrument
Note:
scan measurements.
Rev. No. 1.6 103