tecan Infinite 200 PRO Instructions For Use Manual page 192

TECAN AUSTRIA GMBH, Untersbergstrasse 1a, A-5082 Grödig / Salzburg, Austria
T +43 62 46 89 33, F +43 62 46 72 770, office.austria@tecan.com, www.tecan.com
Declaration of Conformity
We, TECAN Austria GmbH herewith declare under our sole responsibility that the
product identified as:
Product Type:
Model Designation:
Article Number(s):
Variants:
Options:
is in conformity with the provisions of the following European Directive(s) when installed in accordance
with the installation instructions contained in the product documentation:
2014/30/EU – EMC Directive
2006/42/EC – Machinery Directive
and that the standards referenced below were taken in consideration:
EN 61010-1:2001/AC:2002
EN 61010-2-081:2002
/A1:2003
EN 60825-1:2007
EN 61326-1:2013
EN ISO 12100:2010
Microplate Reader
INFINITE 200 PRO
30050303
Infinite M200 PRO, Infinite F200 PRO,
Cuvette, Injector, Gas Control Module
Safety requirements for electrical equipment for measurement, control, and
laboratory use -- Part 1: General requirements
Safety requirements for electrical equipment for measurement, control, and
laboratory use -- Part 2-081: Particular requirements for automatic and semi-
automatic laboratory equipment for analysis and other purposes
Safety of laser products -- Part 1: Equipment classification and requirements
Electrical Equipment for Measurement, Control, and Laboratory Use - EMC
Requirements -- Part 1: General requirements
Safety of machinery - General principles for design - Risk assessment and risk
reduction