Multiple Reads Per Well; Mrw Type - tecan infinite 200 Instructions For Use Manual

6.6 Multiple Reads Per Well

6.6.1

MRW Type

2008-07
The i-Control software allows multiple reads per well (MRW) to be performed in
absorbance, fluorescence top and fluorescence bottom mode.
The multiple reads per well functions can be activated on an absorbance or
fluorescence intensity program strip by selecting the 'Multiple reads per well'
check box (see Figure 6-1 below).
Figure 6-1: Multiple reads per Well
The function 'multiple reads per well' is only available for the fixed
wavelength reading modes 'absorbance', 'fluorescence intensity top'
and 'fluorescence intensity bottom'. The function is not available for
The MRW types define the pattern how the measurement will be performed. The
software allows seven different MRW types to be selected:
1) Square
2) Square (filled)
3) Circle
4) Circle (filled)
5) X-line
6) Y-line
7) XY-line
Instructions for Use for infinite® 200 No. 30017581 Rev. No. 1.4
6. Operating the infinite® 200
Note:
scan measurements.
109