Measurement With A Manual G-Factor - tecan infinite 200 Instructions For Use Manual

6. Operating the infinite® 200
6.4.7

Measurement with a Manual G-Factor

106
If the displayed G-Factor does not match the calibrated value (e.g. the G-Factor
has been manually changed or loaded with a method), the corresponding value
will be marked as 'Manual G-Factor'.
The calibrated G-Factor can be restored by clicking the '>>' button on the left side
of the displayed G-Factor.
G-Factor adjustment via '>>' button is only possible, if a calibrated
G-Factor is available for the corresponding wavelength.
Instructions for Use for infinite® 200 No. 30017581 Rev. No. 1.4
Note
2008-07