Start Via Touch Probe Initiator (Terminal X5/E5) - Lenze 9300 System Manual

Show/Hide Bookmarks
7.5.45.6
Fig. 7-140
L

Start via touch probe initiator (terminal X5/E5)

Stop!
In the default setting the terminal X5/E5 is assigned to another function.
Function
•
Set C0757 = 1.
•
The function is activated by simultaneously setting the inputs:
– DFRFG-QSP and DFRFG-RESET = HIGH.
•
Starting procedure:
– Signals at DFRFG-QSP and DFRFG-RESET = LOW.
– Otherwise touch probe signals are ignored.
•
A LOW-HIGH edge at terminal X5/E5 starts the process:
DFRFG-OUT
DFRFG-IN
Touch-Probe X5/E5
DFRFG-QSP
DFRFG-RESET

Start via touch probe initiator (terminal X5/E5)

Function library
EDSVS9332P-D21 EN 3.0
t
7-183