Lenze 9300 System Manual page 122

Show/Hide Bookmarks
This documentation is valid for 9300 position controllers as of version:
Type
Design:
EP = Built-in unit IP20
CP = Cold Plate
Hardware version and index
Software version and index
Variant
Explanation
© 2004 Lenze Drive Systems GmbH, Hameln
No part of these Instructions must be copied or given to third parties without written approval of Lenze Drive Systems GmbH.
All indications given in this documentation have been selected carefully and comply with the hardware and software described.
Nevertheless, deviations cannot be ruled out. We do not take any responsibility or liability for damages which might possibly occur. Necessary
corrections will be included in the next edition.
3.0 11/2004
33.932X EP 2x 2x
33.933X EP 2x 2x
33.932X CP 2x 2x
(9321 - 9329)
(9330 - 9332)
- V003 Cold Plate (9321 - 9328)