Target-Reached" Message (Pos-In-Target) - Lenze 9300 System Manual

Show/Hide Bookmarks
Function library
7.5.9.6

"Target-reached" message (POS-IN-TARGET)

Purpose
Messaging the termination of positioning.
Function
•
A positioning process is terminated when the position setpoint POS-SETPOS of the profile
generator has reached the target position POS-TARGET ("setpoint-based").
•
POS-IN-TARGET = HIGH messages that the position setpoint POS-SETPOS has reached the
target position POS-TARGET.
•
The other program functions are only processed further when
Tip!
Because of mains failure, the drive may not be in the indicated position, although the message
POS-IN-TARGET was indicated.
7-64
EDSVS9332P-D21 EN 3.0
POS-IN-TARGET = HIGH.
L