Lenze 9300 System Manual page 464

Show/Hide Bookmarks
Code
No. LCD
C0262 MPOT1 TIR
C0263 MPOT1 TIF
C0264 MPOT1 ON/OFF
C0265 MPOT1 INIT
[C0267]
1 UP
2 DOWN
[C0268] MPOT1-INACT
C0269
1 (C0267/1)
2 (C0267/2)
3 (C0268)
C0325 VP2 ADAPT
C0326 VP3 ADAPT
C0327 SET2 ADAPT
C0328 SET1 ADAPT
C0329 ADAPT ON/OFF
C0332 PCTRL TIR
C0333 PCTRL TIF
C0336 ACT VP
C0337 BI/UNIPOLAR
C0338 ARIT1 FUNCT
L
Possible settings
Lenze Selection
10.0 0.1
10.0 0.1
0 0 No change
1 Deceleration with T
2 Deceleration with T
3 Jump with T
if
4 Jump with T
if
5 Acceleration with T
0 0 Value during mains failure
1 lower limit of C0261
2 0 %
1000 FIXED0
1000 FIXED0
1000 FIXED0
1.0 0.1
1.0 0.1
100.00 0.00
0.00 0.00
0 0 No process controller adaptation
1 External via input
2 Adaptation via setpoint
3 Adaptation via control difference
0.000 0.000
0.000 0.000
0.0
0 0 Bipolar
1 Unipolar
1 0 OUT = IN1
1 IN1 + IN2
2 IN1 - IN2
3 IN1 * IN2
4 IN1 / IN2
5 IN1/(100% - IN2)
EDSVS9332P-D22 EN 3.0
Configuration
{0.1 s} 6000.0 MPOT1
{0.1 s} 6000.0 MPOT1
to 0%
if
to C0261
if
= 0 to 0%
= 0 to C0261
to C0260
ir
→ Selection list 2 Digital inputs of motor potentiometers
→ Selection list 2 MPOT1
500.0 PCTRL
{0.1}
500.0 PCTRL
{0.1}
{0.01 %} 100.00 PCTRL
{0.01 %} 100.00 PCTRL
{0.001 s} 999.900 PCTRL
{0.001 s} 999.900 PCTRL
500.0 PCTRL
{0.1}
Important
Acceleration time
(referring to change 0 ... 100 %)
Deceleration time
(referring to change 0 ... 100 %)
MPOT1
Deactivation function of motor pot
Function which is executed when motor pot is
deactivated via the input MPOT1-INACTIVE.
MPOT1
Initialisation.Value which is accepted during
mains switching and activated motor
potentiometer.
Mpot-UP
MPOT-Down
Input signal configuration
Process controller adaptation gain (V
p2
Process controller adaptation gain (V
p3
Set speed threshold nset2 of the process
controller adaptation
(condition: C0327 > C0328)
Set speed threshold nset1 of the process
controller adaptation
(condition: C0328 < C0327)
PCTRL
Activate process controller adaptation
Acceleration time Tir
Refers to setpoint change 0...100 %
Deceleration time Tif
Refers to setpoint change 0...100 %
Current Vp
PCTRL
Bipolar/unipolar range of action
ARIT1
Function selection
)
)
7-333