Lenze 9300 System Manual page 97

Show/Hide Bookmarks
Fig. 5-8
L
Dialog box " Control"
Field Command
1 Select "Negative manual"
Reset "Negative manual"
1, 2 "Positive manual" and "Negative manual"
selected
Tip!
•
To assign the reverse direction to the function "Positive manual" and "Negative manual",
change to the dialog box "Base settings" and set the field "Position polarity" to "inverted".
•
You can quit overridden limit switches only by changing the traversing direction ("Positive
manual" or "Negative manual").
Commissioning
Function
The drive positions in the negative direction towards the limit switch.
•
Test positioning limits
•
Override travel range limit switch to test its function.
The drive stops.
The drive brakes with a-max down to standstill.
EDSVS9332P-C EN 3.0
9300pos041
5-13