Changing The Switch Profile - Lenovo RackSwitch G8332 Command Reference Manual

Changing the Switch Profile

700
G8332 Command Reference for ENOS 8.4
The Enterprise NOS software for the G8332 can be configured to operate in
different modes for different deployment scenarios. The deployment profile
changes some of the basic switch behavior, shifting switch resources to optimize
capacity levels to meet the needs of different types of networks. For more
information about deployment profiles, see the Lenovo RackSwitch G8332
Application Guide for Lenovo Enterprise Network Operating System 8.4.
To change the deployment profile, select the new profile and reboot the G8332. Use
the following command to select a new profile:
RS G8332(config)# boot profile {acl|default|ipmc­opt|openflow}
The following list describes the boot profile options:
acl ‐ deployment profile with maximum Access Control Lists (ACLs)

default ‐ deployment profile with balanced resources

ipmc­opt ‐ deployment profile with different IPMC entries and ACLs:

acls­none ‐ 1792 IPMC entries and no ACLs

acls­128 ‐ 1536 IPMC entries and 128 ACLs

acls­256 ‐ 1280 IPMC entries and 256 ACLs

acls­384 ‐ 1024 IPMC entries and 384 ACLs

openflow ‐ OpenFlow Only deployment profile
