sFlow Port Configuration
394
G8332 Command Reference for ENOS 8.4
Use the following commands to configure the sFlow port on the switch.
Table 175.
sFlow Port Configuration Options
Command Syntax and Usage
sflow polling <5‐60>
Configures the sFlow polling interval, in seconds.
The default setting is disabled.
Command mode: Interface port
no sflow polling
Disables sFlow polling interval.
Command mode: Interface port
sflow sampling <256‐65536>
Configures the sFlow sampling rate, in packets per sample.
The default setting is disabled.
Command mode: Interface port
no sflow sampling
Disables sFlow sampling rate.
Command mode: Interface port