Acl Group Configuration - Lenovo RackSwitch G8332 Command Reference Manual

ACL Group Configuration

© Copyright Lenovo 2016
These commands allow you to compile one or more ACLs into an ACL group.
Once you create an ACL group, you can assign the ACL group to one or more
ports.
Table 211.
ACL Group Configuration Commands
Command Syntax and Usage
[no] access­control group <1‐256> list <1‐256>
Adds or removes the selected IPv4 ACL to the ACL group.
Command mode: Global configuration
[no] access­control group <1‐256> list6 <1‐128>
Adds or removes the selected IPv6 ACL to the ACL group.
Command mode: Global configuration
show access­control group <1‐256>
Displays the current ACL group parameters.
Command mode: All
Chapter 4: Configuration Commands
435