FCoE Forwarder Configuration
628
G8332 Command Reference for ENOS 8.4
Use the following commands to configure FCoE Forwarder (FCF) parameters.
The following table describes the FCF configuration options.
Table 355.
FCoE Configuration Options
Command Syntax and Usage
fcf areasize <256‐4096> vlan <VLAN ID (2‐4094)>
Configures area width.
Command mode: Global configuration
fcf concurrentlogin <1‐2048>
Configures the maximum number of concurrent FLOGI/FDISC for this FCF.
The default setting is 16.
Command mode: VLAN
no fcf concurrentlogin
Sets the maximum number of concurrent FLOGI/FDISC for this FCF to 0.
Command mode: VLAN
[no] fcf enable
Enables or disables the VLAN as Fibre Channel Forwarding VLAN.
The default setting is disabled.
Command mode: VLAN
show fcf
Displays FCF information. For details, see Chapter 2, "FCoE Forwarder
Information.
Command mode: All