Lenovo RackSwitch G8332 Command Reference Manual page 346

346
G8332 Command Reference for ENOS 8.4
Table 149.
Host Log Configuration Options (continued)
Command Syntax and Usage
logging host <1‐2> facility <0‐7>
This option sets the facility level of the first or second syslog host displayed.
The default value is 0.
Command mode: Global configuration
logging host <1‐2> port <UDP port (1‐65535)>
Configure the UDP server port used by the syslog host to receive logging
messages from the switch.
Command mode: Global configuration
logging host <1‐2> severity <0‐7>
This option sets the severity level of the first or second syslog host displayed.
The default value is 7, which means log all severity levels.
Command mode: Global configuration
no logging host <1‐2>
Deletes the specified syslog host.
Command mode: Global configuration
[no] logging log {all|<feature>}
Enables or disables features for which syslog messages can be generated. You
can choose to enable/disable syslog on all available features by using the
option all or enable/disable specific features (such as vlans, stg or ssh).
For a complete list of features, see page
Command mode: Global configuration
[no] logging pdrop enable
Enables or disables packet drop logging.
By default, the switch generates these messages once every 2 minutes.
Command mode: Global configuration
logging pdrop interval <0‐30>
Configures the packet drop logging interval, in minutes.
The default value is 2 minutes.
Command mode: Global configuration
logging source­interface loopback <1‐5>
Sets the loopback interface number for syslogs.
Command mode: Global configuration
no logging source­interface loopback
Removes the loopback interface for syslogs.
Command mode: Global configuration
348.