Igmp Filtering Configuration - Lenovo RackSwitch G8332 Command Reference Manual

IGMP Filtering Configuration

IGMP Filter Definition
578
G8332 Command Reference for ENOS 8.4
The following table describes the commands used to configure an IGMP filter.
Table 310.
IGMP Filtering Configuration Options
Command Syntax and Usage
ip igmp profile <1‐16>
Configures the IGMP filter. To view command options, see page
Command mode: Global configuration
[no] ip igmp filtering
Enables or disables IGMP filtering globally.
Command mode: Global configuration
show ip igmp filtering
Displays the current IGMP Filtering parameters.
Command mode: All
The following table describes the commands used to define an IGMP filter.
Table 311.
IGMP Filter Definition Options
Command Syntax and Usage
ip igmp profile <1‐16> action {allow|deny}
Allows or denies multicast traffic for the IP multicast addresses specified.
The default action is deny.
Command mode: Global configuration
[no] ip igmp profile <1‐16> enable
Enables or disables this IGMP filter.
Command mode: Global configuration
ip igmp profile <1‐16> range <IP address 1> <IP address 2>
Configures the range of IP multicast addresses for this filter.
Command mode: Global configuration
no ip igmp profile <1‐16>
Deletes this filter's parameter definitions.
Command mode: Global configuration
show ip igmp profile <1‐16>
Displays the current IGMP filter.
Command mode: All
578.