Static Fdb Configuration - Lenovo RackSwitch G8332 Command Reference Manual

Static FDB Configuration

© Copyright Lenovo 2016
Table 230.
Static Multicast MAC Configuration Options
Command Syntax and Usage
no mac­address­table multicast all [interface port
<port number or alias>|mac <MAC address>|vlan <VLAN ID (1‐4094)>]
Deletes all static multicast entries.
interface port deletes all static multicast entries that use the specified

port
mac deletes all static multicast entries that use the specified MAC address

vlan deletes all static multicast entries that use the specified vlan

Command mode: Global configuration
show mac­address­table multicast
Display the current static multicast entries.
Command mode: All
Use the following commands to configure static entries in the Forwarding
Database (FDB).
Table 231.
FDB Configuration Options
Command Syntax and Usage
[no] mac­address­table static <MAC address> port
<port alias or number>
Adds or removes a permanent FDB entry. Enter the MAC address using the
following format: xx:xx:xx:xx:xx:xx.
For example, 08:00:20:12:34:56.
You can also enter the MAC address as follows: xxxxxxxxxxxx.
For example, 080020123456.
Note: Available if routing is enabled on the port.
Command mode: Global configuration
mac­address­table static <MAC address> vlan <VLAN ID (1‐4094)>
{port <port alias or number>|portchannel <1‐104>|adminkey <1‐65535>}
Adds a permanent FDB entry. Enter the MAC address using the following
format: xx:xx:xx:xx:xx:xx.
For example, 08:00:20:12:34:56.
You can also enter the MAC address as follows: xxxxxxxxxxxx.
For example, 080020123456.
Note: Available if routing is disabled on the port.
Command mode: Global configuration
Chapter 4: Configuration Commands
467