Log_Notice - Lenovo RackSwitch G8332 Command Reference Manual

LOG_NOTICE

© Copyright Lenovo 2016
Thread LOG_NOTICE Message
ARP table is full.
Current config successfully tftpʹd <filename> from <hostname>
Current config successfully tftpʹd to <hostname>: <filename>
Port <port> mode is changed to full duplex for 1000 Mbps
operation.
CONSOLE RADIUS: authentication timeout. Retrying...
CONSOLE RADIUS: failed to contact primary|secondary server
CONSOLE RADIUS: No configured RADIUS server
CONSOLE RADIUS: trying alternate server...
FCF FCF configured on vlan <VLAN Number>
FCF FCF disabled on vlan <VLAN Number>
HOTLINKS ʺErrorʺ is set to ʺStandby|Activeʺ
HOTLINKS ʺLearningʺ is set to ʺStandby|Activeʺ
HOTLINKS ʺNoneʺ is set to ʺStandby|Activeʺ
HOTLINKS ʺSide Maxʺ is set to ʺStandby|Activeʺ
HOTLINKS has no ʺ{Side Max|None|Learning|Error}ʺ interface
MGMT <username> automatically logged out from BBI because changing
of authentication type
MGMT <username>(<user type>) {logout|ejected|idle timeout|connection
closed} from {BBI|Console|Telnet/SSH}
MGMT <username>(<user type>) login {on Console|from host <IP address>|
from BBI}
MGMT Authentication failed for backdoor.
MGMT Authentication failed for backdoor. Password incorrect!
MGMT Authentication failed for backdoor. Telnet disabled!
MGMT boot config block changed
MGMT boot image changed
MGMT boot mode changed
MGMT enable password changed
MGMT Error in setting the new config
Appendix A: Enterprise NOS System Log Messages
745