Ipv6 Static Route Configuration; Ipv6 Neighbor Discovery Cache Configuration - Lenovo RackSwitch G8332 Command Reference Manual

IPv6 Static Route Configuration

IPv6 Neighbor Discovery Cache Configuration

© Copyright Lenovo 2016
The following table describes the IPv6 static route configuration commands.
Table 341.
IPv6 Static Route Configuration Options
Command Syntax and Usage
ip route6 <IPv6 address> <IPv6 prefix length> <IPv6 gateway address>
[<interface number (1‐126)>]
Adds an IPv6 static route.
Command mode: Global configuration
no ip route6 <IPv6 address> <IPv6 prefix length> [<IP interface number>]
Removes the selected route.
Command mode: Global configuration
no ip route6 [destination­address <IPv6 address>|gateway
<default IPv6 gateway address>|interface <IP interface number>|all]
Clears the selected IPv6 static routes.
Command mode: Global configuration
show ipv6 route static
Displays the current static route configuration.
Command mode: All
The following table describes the IPv6 Neighbor Discovery cache configuration
commands.
Table 342.
IPv6 Neighbor Discovery Cache Configuration Options
Command Syntax and Usage
ip neighbors <IPv6 address> <MAC address> vlan <VLAN ID (1‐4094)>
port <port number or alias>
Adds a static entry to the Neighbor Discovery cache table.
Command mode: Global configuration
no ip neighbors <IPv6 address>
Deletes the selected entry from the static Neighbor Discovery cache table.
Command mode: Global configuration
no ip neighbors all [ip <IP interface number>|interface port
<port alias or number>|vlan <VLAN ID (1‐4094)>]
Clears the selected static entries in the Neighbor Discovery cache table.
Command mode: Global configuration
Chapter 4: Configuration Commands
615