Edge Virtual Bridge Vsi Type Database Configuration - Lenovo RackSwitch G8332 Command Reference Manual

Edge Virtual Bridge VSI Type Database Configuration

648
G8332 Command Reference for ENOS 8.4
The following table describes the EVB VSI Type Database configuration options.
Table 371.
Edge Virtual Bridge VSI Type Database Configuration Options
Command Syntax and Usage
virt evb vsidb <VSIDB number>
Enter Virtual Station Interface Database configuration mode.
Command mode: Global configuration
filename <file name>
Sets the Virtual Station Interface Type database document name.
Command mode: VSI Database
no filename
Deletes the Virtual Station Interface Type database document name.
Command mode: VSI Database
filepath <file path>
Sets the Virtual Station Interface Type database document path.
Command mode: VSI Database
no filepath
Deletes the Virtual Station Interface Type database document path.
Command mode: VSI Database
host <IP address> [mgt­port|data­port]
Sets the Virtual Station Interface Type database manager IP address and the
port used for the connection.
By default, the management port is used.
Command mode: VSI Database
port <1‐65534>
Sets the Virtual Station Interface Type database manager port.
Command mode: VSI Database
protocol {http|https}
Sets the Virtual Station Interface Type database transport protocol.
The default setting is HTTP.
Command mode: VSI Database
update­interval <5‐300>
Sets the Virtual Station Interface Type database update interval in seconds.
Command mode: VSI Database
[no] update­interval
Disables the Virtual Station Interface Type database periodic update.
Command mode: VSI Database