Ipv6 Tcp/Udp Filtering Configuration - Lenovo RackSwitch G8332 Command Reference Manual

IPv6 TCP/UDP Filtering Configuration

© Copyright Lenovo 2016
Table 204.
IP version 6 Filtering Options
Command Syntax and Usage
no access­control list6 <1‐128> ipv6 traffic­class
Deletes the configured traffic class for the specified ACL.
Command mode: Global configuration
default access­control list6 <1‐128> ipv6
Resets the IPv6 parameters for the ACL to their default values.
Command mode: Global configuration
show access­control list6 <1‐128> ipv6
Displays the current IPv6 parameters.
Command mode: All
These commands allows you to define TCP/UDP matching criteria for an ACL.
Table 205.
IPv6 ACL TCP/UDP Filtering Options
Command Syntax and Usage
access­control list6 <1‐128> tcp­udp source­port
<source port number (1‐65535)> [<mask (0xFFFF)>]
Defines a source port for the ACL. If defined, traffic with the specified TCP or
UDP source port will match this ACL. Specify the port number. Listed here are
some of the well‐known ports:
Number Name
20 ftp­data
21 ftp
22 ssh
23 telnet
25 smtp
37 time
42 name
43 whois
53 domain
69 tftp
70 gopher
79 finger
80 http
Command mode: Global configuration
no access­control list6 <1‐128> tcp­udp source­port
Deletes the configured IPv6 source‐port for the specified ACL.
Command mode: Global configuration
Chapter 4: Configuration Commands
429