28
G8332 Command Reference for ENOS 8.4
Table 3.
Description of Global Commands
Command
telnet
show history
show who
show line
Action
This command is used to form a Telnet session
between the switch and another network device. The
format is as follows:
telnet [{<hostname>|<IP address>}
[<service port (1‐65535)>]
[dataport|mgtport]]
Where:
hostname/IP address: Sets the target
station.
port: Sets the logical Telnet port or service
number.
By default, the management port is used. To use a
specific port, use the following options:
data port: dataport
management port: mgtport
Note: The DNS parameters must be configured if
specifying hostnames.
This command displays the last ten issued
commands.
Displays a list of users who are currently logged in.
Displays a list of users who are currently logged in,
in table format.