IP Route Manipulation
722
G8332 Command Reference for ENOS 8.4
The following table describes the IP route manipulation commands.
Table 409.
IP Route Manipulation Options
Command Syntax and Usage
debug routemap pbr
Enables policy‐based routing debugging.
Command mode: Privileged EXEC
show ip route
Shows all routes.
Command mode: All
show ip route address <IP address>
Shows a single route by destination IP address.
Command mode: All
show ip route gateway <IP address>
Shows routes to a default gateway.
Command mode: All
show ip route interface <1‐128>
Shows routes on a single interface.
Command mode: All
show ip route tag {address|bgp|broadcast|fixed|martian|
|multicast|ospf|rip|static}
Shows routes of a single tag. For a description of IP routing tags, see Table 40
on page
88.
Command mode: All
show ip route type {broadcast|direct|indirect|local|
|martian|multicast}
Shows routes of a single type. For a description of IP routing types, see
Table 39 on page
88.
Command mode: All
clear ip route
Clears the route table from switch memory.
Command mode: Privileged EXEC
Note:
To display all routes, you can also refer to "IP Routing Information" on
page
87.