IPsec Configuration
IPsec Transform Set Configuration
© Copyright Lenovo 2016
The following table describes the commands used to configure IPsec.
Table 319.
IPsec Options
Command Syntax and Usage
[no] ipsec enable
Enables or disables IPsec.
Command mode: Global configuration
show ipsec
Displays the current IPsec settings.
Command mode: All
The following table describes the commands used to configure IPsec transforms.
Table 320.
IPsec Transform Set Options
Command Syntax and Usage
ipsec transformset <1‐10> {ahsha1|esp3des|espaescbc|
|espnull|espsha1}
Sets the AH or ESP authentication, encryption, or integrity algorithm. The
available algorithms are as follows:
ahsha1
esp3des
espaescbc
espnull
espsha1
Command mode: Global configuration
ipsec transformset <1‐10> transport {ahsha1|esp3des|
|espaescbc|espnull|espsha1}
Sets transport mode and the AH or ESP authentication, encryption, or
integrity algorithm.
Command mode: Global configuration
ipsec transformset <1‐10> tunnel {ahsha1|esp3des|
|espaescbc|espnull|espsha1}
Sets tunnel mode and the AH or ESP authentication, encryption, or integrity
algorithm.
Command mode: Global configuration
Chapter 4: Configuration Commands
587