Snmpv3 Dump Information - Lenovo RackSwitch G8332 Command Reference Manual

SNMPv3 Dump Information

© Copyright Lenovo 2016
The following command displays SNMPv3 information:
show snmp­server v3
Command mode: All
Engine ID = 80:00:4F:4D:03:08:17:F4:8C:E8:00
usmUser Table:
User Name Protocol
­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­
adminmd5 HMAC_MD5, DES PRIVACY
adminsha HMAC_SHA, DES PRIVACY
v1v2only NO AUTH, NO PRIVACY
adminshaaes HMAC_SHA, AES PRIVACY
vacmAccess Table:
Group Name Model Level ReadV WriteV NotifyV
­­­­­­­­­­ ­­­­­­­ ­­­­­­­­­­­­ ­­­­­­­­­­ ­­­­­­­­­­ ­­­­­­­­­­
v1v2grp snmpv1 noAuthNoPriv iso iso v1v2only
admingrp usm authPriv iso iso iso
vacmViewTreeFamily Table:
View Name Subtree Mask Type
­­­­­­­­­­­­­­­­­­­­ ­­­­­­­­­­­­­­­­­­­­­­­­­ ­­­­­­­­­­­­­­ ­­­­­­­­­
iso 1 included
v1v2only 1 included
v1v2only 1.3.6.1.6.3.15 excluded
v1v2only 1.3.6.1.6.3.16 excluded
v1v2only 1.3.6.1.6.3.18 excluded
vacmSecurityToGroup Table:
All active SNMPv3 groups are listed below:
Sec Model User Name Group Name
­­­­­­­­­­ ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­
snmpv1 v1v2only v1v2grp
usm adminmd5 admingrp
usm adminsha admingrp
usm adminshaaes admingrp
snmpCommunity Table:
Index Name User Name Tag
­­­­­­­­­­­­­­­­ ­­­­­­­­­­ ­­­­­­­­­­­­­­­­­­­­ ­­­­­­­­­­­­
trap1 public v1v2only v1v2trap
snmpNotify Table:
Name Tag
­­­­­­­­­­­­­­­­­­­­ ­­­­­­­­­­­­­­­­­­­­
v1v2trap v1v2trap
snmpTargetAddr Table:
Name Transport Addr Port Taglist Params
­­­­­­­­­­­­­­­ ­­­­­­­­­­­­­­­­­­­­­­­­­ ­­­­ ­­­­­­­­­­­­ ­­­­­­­­­­­­­
trap1 47.81.25.66 162 v1v2trap v1v2param
snmpTargetParams Table:
Name MP Model User Name Sec Model Sec Level
­­­­­­­­­­­­­­­­­­­­ ­­­­­­­­ ­­­­­­­­­­­­­­­­­­­­ ­­­­­­­­­ ­­­­­­­­­­­­
v1v2param snmpv2c v1v2only snmpv1 noAuthNoPriv
Chapter 2: Information Commands
45