334
G8332 Command Reference for ENOS 8.4
Table 145.
General Configuration Commands
Command Syntax and Usage
copy runningconfig startupconfig
Copy the current (running) configuration from switch memory to the
startupconfig partition.
Command mode: Privileged EXEC
copy runningconfig {ftp|tftp|sftp} [dataport|mgtport]
Backs up the current (running) configuration to a file on the selected
FTP/TFTP/SFTP server.
Command mode: Privileged EXEC
copy runningconfig tftp address <TFTP server IP address>
filename <TFTP server filepath> [dataport|mgtport]
Backs up the current (running) configuration to a file on the specified TFTP
server.
Command mode: Privileged EXEC
copy runningconfig <TFTP server filepath> [dataport|mgtport]
Backs up the current (running) configuration to a file on the specified TFTP
server. For example:
copy runningconfig tftp://10.72.97.135:/directory/config.txt mgtport
Command mode: Privileged EXEC
copy <TFTP server filepath> runningconfig [dataport|mgtport]
Restores the current (running) configuration from a file on the specified TFTP
server. For example:
copy tftp://10.72.97.135:/directory/config.txt runningconfig mgtport
Command mode: Privileged EXEC
copy {ftp|tftp|sftp} runningconfig [dataport|mgtport]
Restores current configuration from a FTP/TFTP/SFTP server. For details, see
page
672.
Command mode: Privileged EXEC
copy {tftp|sftp} {cacert|hostkey|hostcert|publickey}
Import interface used by NIST certified test laboratories for USGv6 (NIST SP
500‐267) certification purposes. Required for RSA digital signature
authentication verification during IKEv2 interoperability testing. Uses TFTP or
SFTP to import:
cacert: Certificate Authority root certificate
hostkey: host private key
hostcert: host public key
publickey: host public key
Command mode: Privileged EXEC