Chapter 2. Information Commands - Lenovo RackSwitch G8332 Command Reference Manual

Chapter 2. Information Commands

© Copyright Lenovo 2016
You can view configuration information for the switch in both the user and
administrator command modes. This chapter discusses how to use the command
line interface to display switch information.
Table 5.
Information Commands
Command Syntax and Usage
show interface status <port alias or number>
Displays configuration information about the selected port(s), including:
Port alias and number

Port speed

Duplex mode (half, full, or, auto)

Flow control for transmit and receive (no, yes, or, both)

Link status (up, down, or, disabled)

Port description

For details, see page
Command mode: All
show interface trunk <port alias or number>
Displays port status information, including:
Port alias and number

Whether the port uses VLAN Tagging or not

Port VLAN ID (PVID)

Port description

VLAN membership

FDB Learning status

Flooding status

For details, see page
Command mode: All
show interface transceiver
Displays the status of the port transceiver module on each port. For details, see
page 166.
Command mode: All
show information­dump
Dumps all switch information available (10K or more, depending on your
configuration).
If you want to capture dump data to a file, set your communication software
on your workstation to capture session data prior to issuing the dump
commands.
Command mode: All
164.
165.
33