© Copyright Lenovo 2016
Table 314.
IGMP Querier Configuration Options (continued)
Command Syntax and Usage
ip igmp querier vlan <VLAN ID (1‐4094)> startupcount <1‐10>
Configures the Startup Query Count, which is the number of IGMP Queries
sent out at startup. Each Query is separated by the Startup Query Interval.
The default value is 2.
Command mode: Global configuration
no ip igmp querier vlan <VLAN ID (1‐4094)> startupcount
Resets the Startup Query Count to its default value of 2.
Command mode: Global configuration
ip igmp querier vlan <VLAN ID (1‐4094)> startupinterval <1‐608>
Configures the Startup Query Interval, which is the interval between General
Queries sent out at startup.
The default value is 31 seconds.
Command mode: Global configuration
no ip igmp querier vlan <VLAN ID (1‐4094)> startupinterval
Resets the Startup Query Interval to its default value of 31 seconds.
Command mode: Global configuration
ip igmp querier vlan <VLAN ID (1‐4094)> version {v1|v2|v3}
Configures the IGMP version.
The default version is v3.
Command mode: Global configuration
no ip igmp querier vlan <VLAN ID (1‐4094)> version
Resets the IGMP version to its default value of v3.
Command mode: Global configuration
no ip igmp querier vlan <VLAN ID (1‐4094)>
Deletes the IGMP Querier configuration for the specified VLAN.
Command mode: Global configuration
show ip igmp querier
Displays the current IGMP Querier parameters.
Command mode: All
show ip igmp querier vlan <VLAN ID (1‐4094)>
Displays IGMP Querier information for the selected VLAN.
Command mode: Global configuration
Chapter 4: Configuration Commands
583