Vm Group Information; Vm Bandwidth Information; Vm Profile Information - Lenovo RackSwitch G8332 Command Reference Manual

VM Group Information

VM Bandwidth Information

VM Profile Information

© Copyright Lenovo 2016
The following command displays VM Group parameters:
show virt vmgroup [<1‐4096>]
Command mode: All
VM group 1 current configuration:
Current VM group's secure mode: Disabled
Current Group Ports: 13 17
Current Group vPorts: : empty
VLAN: 2
Tagging/Trunk­mode: Disabled
Current GROUP VMAP Config is empty
The following command displays VM bandwidth management parameters:
show virt vmpolicy vmbwidth
Command mode: All
Bandwidth Profile for VM 00:50:56:a5:32:f7 is enabled.
­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­
TX:
Rate: 1024
Burst: 2048
ACL: 127
The following command displays VM Profile parameters:
show virt vmprofile
Command mode: All
VM profile "test30":
VLAN ID: 30
Traffic shaping not enabled.
VM Groups: 30
Chapter 2: Information Commands
173