Routing Information Protocol Configuration - Lenovo RackSwitch G8332 Command Reference Manual

Routing Information Protocol Configuration

526
G8332 Command Reference for ENOS 8.4
RIP commands are used for configuring Routing Information Protocol parameters.
This option is turned off by default.
Table 274.
Routing Information Protocol Options
Command Syntax and Usage
router rip
Enter Router RIP configuration mode.
Command mode: Global configuration
[no] enable
Globally enables or disables RIP.
Command mode: Router RIP
[no] redistribute {ebgp|eospf|fixed|ibgp|ospf|static}
Configures RIP route distribution. To view command options, see page
Command mode: Router RIP
timers update <1‐120>
Configures the time interval for sending for RIP table updates, in seconds.
The default value is 30 seconds.
Command mode: Router RIP
show ip rip
Displays the current RIP configuration.
Command mode: All
529.