Lenovo RackSwitch G8332 Command Reference Manual page 742

742
G8332 Command Reference for ENOS 8.4
Thread LOG_INFO Message (continued)
MGMT Flash Write Error. Failed to allocate buffer. Quitting
MGMT Flash Write Error. Trying again
MGMT image1|2 download completed. Now writing to flash.
MGMT image1|2 downloaded {from host <hostname>|via browser},
filename too long to be displayed, software version <version>
MGMT image1|2 downloaded from host <hostname>, file ʹ<filename>ʹ,
software version <version>
MGMT Incorrect image being loaded
MGMT Invalid diff track address. Continuing with apply()
MGMT Invalid image being loaded for this switch type
MGMT invalid image download completed. Now writing to flash.
MGMT invalid image downloaded {from host <hostname>|via browser},
filename too long to be displayed, software version <version>
MGMT invalid image downloaded from host <hostname>, file ʹ<filename>ʹ,
software version <version>
MGMT New config set
MGMT new configuration applied [from BBI|EM|SCP|SNMP]
MGMT new configuration saved from {BBI|ISCLI|SNMP}
MGMT scp<username>(<user type>) {logout|ejected|idle timeout|
connection closed} from {Console|Telnet/SSH}
MGMT scp<username>(<user type>) login {on Console|from host
<IP address>}
MGMT SP boot kernel download completed. Now writing to flash.
MGMT SP boot kernel downloaded {from host <hostname>|via browser},
filename too long to be displayed, software version <version>
MGMT SP boot kernel downloaded from host <hostname>, file ʹ<filename>ʹ,
software version <version>
MGMT Starting Firmware download for {invalid image|image1|image2|
boot kernel|undefined|SP boot kernel}.
MGMT Static FDB entry on disabled VLAN
MGMT Tech support dump failed
MGMT Tech support dump successfully tftpʹd to <hostname>:<filename>
MGMT Two Phase Apply Failed in Creating Backup Config Block.
MGMT undefined download completed. Now writing to flash.