Miscellaneous Vmready Configuration - Lenovo RackSwitch G8332 Command Reference Manual

Miscellaneous VMReady Configuration

646
G8332 Command Reference for ENOS 8.4
Table 368.
VM Ware Configuration Options
Command Syntax and Usage
virt vmware vcspec <IP address> <username> [noauth]
Defines the Virtual Center credentials on the switch. Once you configure the
Virtual Center, VM Agent functionality is enabled across the system.
You are prompted for the following information:
IP address of the Virtual Center

User name and password for the Virtual Center

Whether to authenticate the SSL security certificate (yes or no)

Command mode: Global configuration
no virt vmware vcspec
Deletes the Virtual Center credentials on the switch.
Command mode: Global configuration
show virt vmware
Displays the current VMware parameters.
Command mode: All
You can pre‐configure MAC addresses as VM Organization Unique Identifiers
(OUIs). These configuration commands are only available using the Enterprise
NOS CLI and the Miscellaneous VMReady Configuration Menu. The following
table describes the VMReady configuration options.
Table 369.
VMReady Configuration Options
Command Syntax and Usage
[no] virt vmrmisc lmac
Enables or disables the switch to treat locally administered MAC addresses as
VMs.
Command mode: Global configuration
virt vmrmisc oui <3 byte VM MAC OUI> <Vendor Name>
Adds a MAC OUI.
Command mode: Global configuration
no virt vmrmisc oui <3 byte VM MAC OUI>
Removes a MAC OUI.
Command mode: Global configuration
show virt oui
Displays all the configured MAC OUIs.
Command mode: All