Lenovo RackSwitch G8332 Command Reference Manual page 86

86
G8332 Command Reference for ENOS 8.4
Table 37.
Layer 3 Information Commands (continued)
Command Syntax and Usage
show ip routing
Displays the current IP forwarding settings.
Command mode: All
show ip slp information
Displays Service Location Protocol (SLP) information.
Command mode: All
show ip slp directory­agents
Displays SLP Directory Agent (DA) information.
Command mode: All
show ip slp user­agents
Displays SLP User Agent (UA) information.
Command mode: All
show ip tenant [info] <1‐30>
Displays tenant information.
Command mode: All
show ip vrrp information
Displays VRRP information. For details, see page
Command mode: All
show ipsec manual­policy
Displays information about manual key management policy for IP security.
For more information options, see page
Command mode: All
show layer3
Dumps all Layer 3 switch information available (10K or more, depending on
your configuration).
If you want to capture dump data to a file, set your communication software
on your workstation to capture session data before issuing the dump
commands.
Command mode: All
show layer3 igmp­groups
Displays the total number of IGMP groups that are registered on the switch.
Command mode: All
show layer3 ipmc­groups
Displays the total number of current IP multicast (IPMC) groups that are
registered on the switch.
Command mode: All
123.
132.