Zone Configuration - Lenovo RackSwitch G8332 Command Reference Manual

Zone Configuration

630
G8332 Command Reference for ENOS 8.4
Use the following commands to configure FCF zones.
Table 357.
Fibre Channel Zone Configuration Commands
Command Syntax and Usage
zone clone <selected zone name> <new zone name> vlan <VLAN ID (2‐4094)>
Creates a new zone with the attributes of the selected zone.
Command mode: Global configuration
[no] zone default­zone permit vlan <VLAN ID (2‐4094)>
Permits or denies traffic flow to default zone members.
Command mode: Global configuration
[no] zone name <1‐64 characters> vlan <VLAN ID (2‐4094)>
Enter FC Zone configuration mode for the specified zone. If the zone doesn't
exist, it is created.
The no form of the command erases the zone.
Command mode: Global configuration
zone rename <current name> <new name> vlan <VLAN ID (2‐4094)>
Renames the FC zone.
Command mode: Global configuration
[no] member {pwwn <pwwn>|fcalias <alias ID>}
Adds or removes zone members based on:
pwwn: Port World Wide Number.

fcalias: Alias name of the FC device.

Command mode: FC Zone configuration